Dandong Dongba Lubricating Material Co., Ltd.
Post code: 118007
Email: [email protected]
Address: 108 Building Industrial Park, Zhen'an District, Dandong City, Liaoning Province
Small grease package meets the requirements of filling (1) The top of the barrel of the small grease package should not be collected too much towards the center, otherwise it will be detrimental to the sealing.
(2) The vertical teeth of the cover are sufficiently protruding to prevent the capping machine from slipping when screwing the cap.
Grease small packaging needs to meet the needs of storage and transportation. Because of the harsh storage and transportation conditions of grease, the requirements for the barrel type are also relatively high. Pay attention to the following points during the design process.
(1) After the barrel mouth is screwed on, the height of the barrel is the same as that of the grease investment barrel. The barrel-shaped barrel mouth is flush with the barrel body after the cap is screwed. The advantage of this is that it can meet the pressure of the barrel body and prevent the packaging box from collapsing during stacking. Packaging below 2L can not be considered in this design, because the packaging below 2L is smaller in volume, can hold more barrels in one box, and can be packed together to meet pressure requirements without causing collapse.
(2) The fillet at the bottom of the barrel should be as large as possible. During the production of grease from the factory to the customer's use, it needs to be moved and transported many times. The grease packaging will inevitably experience impacts and squeezes. If the fillet is too small, it will easily deform or even rupture during the impact, and if the fillet is appropriately large, it can withstand a strong collision, and it can automatically recover even if deformation occurs.
(3) Add reinforcing ribs to the barrel to increase strength. In order to increase the strength of the barrel, it is necessary to set up ribs in the barrel. The form of the ribs can be in various ways depending on the shape. For example, grooves, ramps, etc. can strengthen
Disclaimer: This article is for communication and learning only. The copyright belongs to the original author. Some articles could not be contacted with the original author in time. !! !!